"I
conclude, as I did seven years ago, that our decades of war against
cancer (allopathic medicine) have been a qualified failure."
- J.C. Bailar III, M.D., PhD., Harvard University
An American,
Royal Raymond Rife (1888 - 1971), developed Rife "Machines"
some 73 years ago. Mr. Rife also invented a powerful microscope,
not unlike darkfield microscopes of today. With his invention,
he was able to see viruses and bacteria and watch them die when
he turned on his "machine."
It is
not a machine at all, but an electronic device, which pulses a
light, sound, and electro-magnetic field. The energy output is
very safe because it is square wave in nature, exactly like the
energy output from your car"s ignition system. It is
this pulsated property that makes the rife, and similar machines,
unique. Tuned to the correct number of pulses per second,
herein called frequency, a rife machine was observed by Mr. Rife
to actually break apart pathogens, killing them, while leaving
surrounding tissue unharmed. These cycles/frequencies are
often referred to as Hertz, MHz, or kHz — which is simply how
these cycles are measured scientifically.
Shown
below are our best sellers. Please review the
Price & Order page
for a complete listing of our products. Visit the About
Rife Technology page for more information about
Dr. Royal Raymond Rife.
Left:
MS8209 Digital readout and multimeter
Right: SG-10 Digital frequency generator
MS8209
- An extremely accurate multimeter with frequency “counting”
capabilities (pictured on the left) is included with all
analog machines. It is necessary so the operator can accurately
dial in frequencies. It is accurate to thousandths of a
hertz below 10 hz, hundredths of a hertz between 10 hz.
and 99 hz, tenths of a hertz between 100 an 999 hertz, and
has one hertz resolution from 1000 hz. all the way up to
9,999 hertz. This capability makes it the most accurate
moderately priced frequency counter that we’ve seen.
It is actually more accurate than is necessary below 100
hz., but we can live with that, because it has single hertz
accuracy above 4000 hertz where some lower quality multimeters
are only accurate to ten hertz leaving the operator literally
guessing. In addition to being a readout, it has other uses
around the home. It also measures battery output, house
current, electrical continuity, sound levels, light levels,
temperature, humidity and more.
The SG-10 digital frequency generator (on the right)
comes included with all digital machines if so desired.
It cannot be used with analog units. Sometimes customers
have their own frequency generators such as the GB4000,
F-165, and etc. In that case we deduct the price of the
SG-10 from the purchase and simply don't send it.
Yet
another Rifelabs original creation. The EMX, an updated
emem5, is a model that is not only smaller and lighter than
the original emem5 but is measurably stronger too. Strength
is good but versatility is paramount. Too many frequencies
above 10,000 are being discovered to ignore and with a top
frequency of 10 MILLION hertz, the emx is capable of running
them as they are discovered. This model uses modified em7
wiring and is 13"wide, x 4"deep, x 9" tall.
Click here for
more information on the EMX.
EMEM3D/ Digital machine available in 1 or 2 tube models.
Choose from single or double bubble tubes. (also called
the EMEM5)
Exclusive!
We created the first self contained 2 tube machine.
Like the regular EMEM3D machines, it is compact and comes
a digital input. The dimensions are about 14"
wide by 10" tall by 9" deep. It weighs about
23 lbs. The extra tube significantly increases the
energy output of the machine without drawing additional
power. Our tests have shown the radius of the energy
field at 1MHz to be enlarged by several feet. One
tube is helium-filled and the other is xenon-filled.
Other gases are available, but are not stocked. This machine
is recommended if you will be using digital frequency sources
that spark plugs may interfere with. See ABOUT
SPARK PLUGS below.
EMEM3D/Analog
machine available in 1 or 2 tube models.
Choose from single or double bubble tubes.
We
created the first self contained 2 tube double bubble machines.
As above, it is compact and comes with an analog input and
a free battery-operated digital readout. The knobs
are tuned manually. It is like tuning a radio except the
frequencies are spread out over 6 knobs instead of just
one. The dimensions are about 14" wide by 10"
tall by 9" deep. It weighs about 23 lbs.
The extra tube significantly increases the energy output
of the machine without drawing additional power. Our
tests have shown the radius of the energy field at 1MHz
to be enlarged by several feet. One tube is helium-filled
and the other is xenon-filled. Other gases are available,
but are not stocked.
The
new double bubble machine!! Pictured here is the 2 tube
analog model. As stated above it's available in digital
or analog models.
The
double bubble machines are available as digital or analog,
1 tube or 2 tube models. Analog machine come with readouts
and digital machines come with digital inputs. The difference,
per the manufacturer, is an increase in energy output over
single bubble tubes. The double bubble machines are a little
larger than the others. They weigh about 25 lbs. and are
about 10" deep.
Grounding
Plate AND HAND-HELD WAND
Patent Applied For
All
of our EMEM3 machines come with both a grounding plate and
hand-held wand. This combination provides significantly
more energy than the plasma tube machines without it.
The wand gets its energy from inside the case using energy
that ordinarily dissipates into the air. This energy
is collected by a small antenna and passed along to the
wand. There is no direct electrical connection.
The grounding plate is internally grounded to induce an
energy flow. The wand is special because it can be used
either as a contact device or in a radiant mode with no
contact necesary.
CI-1
Computer Interface
The CI-1 computer interface will enable the user to control
a “Rife” device with a PC or notebook (laptop) computer.
The interface takes the computer’s sound card output,
a sine wave signal, converts it to square wave, and amplifies
it to approximately 10 volts peak to peak. It is compatible
with any “Rife” device requiring a square wave input
except those devices containing spark plugs. The interface
comes with a power supply and all cables necessary to connect
to Rifelabs’ EM devices. (250V wall transformers available.)
No batteries are required. An adaptor, readily available,
will be necessary for those devices having banana jack, or
other inputs. Ken Uzzell’s FREX 12 or FREX 16 software
packages are typically used.
Spark
plugs significantly increase the power of EMEM machines. The drawback
to spark plugs is that they tend to interfere with some digital
input devices. Also, spark plugs generate radio interference.
The energy is safe, square wave energy, but If you live in an
apartment building you might bother your neighbor's radio or TV.
If something is said to you, visit an electronics store and buy
static reducers that plug into wall outlets. Perhaps buy one for
them if need be.. All our analog-only machines come with spark
plugs unless we are specifically told in writing to omit them.
RUN
TIMES
Analog
machines: There is a lot of controversy surrounding running times
of analog EMEM machines because they can overheat. Our cooling
system allows us to run the machines at the hardest, heat producing
frequencies, for at least 2 hours. Every machine is run at 2008
hertz for 2 full hours to pass the heat test. Do not let anyone
say that is impossible. We suggest not exceeding 2 hours so there's
no chance of damaging your machine. We run at 2008 hz for two
reasons. First, the machines work as hard at this frequency as
others near it. Secondly, 2008 is listed as a cancer frequency
and we are experimenting with it. We expect longer run times with
frequencies between 20 and 1400hz, as well as 4000-10,000 hertz.
Digital Machines: Digital seem to run cooler. We have not established
recommended run times yet. If possible, stick to the 2 hr. limit
mentione above. Going a little beyong 2 hrs., perhaps 2½,
should pose no problem, but is not recommended.
Phone:
(717) 684-4954
We can "return-call" to help keep your phone bill
down
Click to enlarge 
Click to enlarge 
Click to enlarge 
